|
Introduce to you new tablet press model "Tabletpress 6000S
NEW" :
Is standard models it
Desktop the press - to read more in detail " Tabletpress 6000 "
The Instruction of the user to Tabletpress 6000S
NEW
The Instruction of the user:
1). This model Tablet press motorized continuous
Actions. You can make skilled and small-scale parties of tablets
In diameter from 4мм up to 12 mm. Tabletpress 6000s NEW it is possible to maintain in manual
mode.
2). the Laboratory tablet press is used in the industry for
Release of pharmaceutical and chemical production, the foodstuffs, tablets
Medical purpose. In all cases when it is required to press
Granulated powder Tabletpress 6000s NEW is suitable for
Uses in laboratory or for manufacture of small parties, that
To make a variety of medical tablets, sugar tablets, tablets
Calcium and so on.
3). it is not necessary to use tabletpress for pressing damp,
Coarse-grained powders and other kinds of raw material not intended for job
With desktop tablets presses.
Technical parameters:
4). the Basic characteristics and productivity press:
The maximal effort of compression 3 KN 3000 kg/см2
The maximal diameter of a tablet (мм) 25
The maximal height of tablets (mm) 11
Diameter of the basis of the top and bottom punch (mm) 10
External diameter of a matrix (mm) 28
The maximal productivity tablet / minute 110
Capacity of the engine 1,1 kW
Weight (kg) 100
Overall dimensions: height (mm) 725
Length and Width (mm) 680Х550
Characteristics tabletpress:
Draft tabletpress is on
To page sxema_tabletpress6000s.jpg
5). the Body tabletpress - a bed of the basis
(14) the cast case, on which basic shaft
(15) combines consistently three cams.
Mahovoe a wheel (2) with the mobile handle
(1) to adjust job the press manually.
The adjusting wheel is placed on the right end of the basic shaft. At the left,
A gear (18) established in gearing with
A small gear. From a pulley of an electric motor
(25) , through a belt the effort is passed to a small gear
(19) through the big pulley
(18) , and thus an electric motor
(24) , results rotation on the basic shaft (15),
And each punch makes movement stipulated by a cam
Accordingly, moving punches up and downwards.
6). All process of job Tablet the press can be divided on:
(a) a fill matrix,
(b) powder press,
(c) .push-out ready tablets
These three actions are carried out continuously and can be adjusted,
To execute observance of parameters of the received tablets.
7). Tabletpress 6000S is the compact, desktop device for
Long job. After you fix press on a table screws,
You can use it. The design is convenient for collecting or dismantling,
Therefore Tabletpress 6000S it is applicable for mobile manufacture. Even if at
You no power supplies accessible on a site, you can use also
To tablets presses manually.
The Instruction on adjustment:
8). Installation replaceable press-instrument:
Clean the bunker (3), dismantle rotary
A paw (11) release transitive a table with
A matrix (12), then get a matrix and both
A punch. And matrixes you should observe fastening of both punches at assembly
Press. After installation of the new complete set of the press-tool it is required
To fix in a table a new matrix. At editing, a table with a matrix establish on
The bottom punch, further lowering the top punch in a matrix, find overlapping
Axes of the top punch and internal diameter of a matrix. When it is achieved
Fix a table with a matrix on the basis of the case. After that establish
A rotary paw (11) the bunker, which you
Preliminary removed. It is required to turn press idling not less
10 rotations for check. If all works smoothly and usually, it is possible to fall asleep
In the bunker a powder and to start press in manufacture.
9). Adjustment of pushing out of a tablet:
Rotate a fist of pushing out of a tablet (16),
Lifting draft of a pusher of the bottom punch (17)
And a vertical plug of moving of the case with the bottom punch
(28) in the maximum point. Rotate the top wheel
Regulators of height of a tablet (27) having released from
The fixing screw if the surface of the bottom punch acts above a matrix
It is wrong. Establish an output of the bottom punch zapodlitso with a level
Matrixes After regulation, establish fixing plate
(29) in grooves shesteren, also record rigidly it
Position.
10). Regulate depths of filling of a matrix a powder. Filling
Matrixes a powder it is adjusted by the bottom wheel (30)
Which at installation rotates into position and fixed by a plate,
To remain motionless at job press. Rotation bottom
An adjusting wheel is responsible for volume of a powder filling a matrix.
Rotating to the right, you power filling on the left, reduce. After all
Adjustments, be convinced, that have fixed a plate in the sufficient image. Same time, attention needs to be turned and on rotation of a wheel
A pusher of a tablet.
11). Adjustments of height of a ready tablet and effort of compression of a powder:
top part of a pusher of the top punch (8)
One is connected to an adjustable basis (6), and of
Nuts (7) it is used as a fixing part.
At adjustment, rotate shestigrannik from the bottom part of a pusher changing
Position of the top punch in the bottom point. Rotating to the right, effort of compression
It will be weakened, and turning on the left, strengthening a degree of compression and reducing
Height of ready tablets. After regulation of force of compression
It is finished, the top nut on a pusher record the necessary position nut
A key.
Instruction on service:
12). Greasing of details press: Greasing to put on all mobile parts
Tablet-press. Before job, all taking place on the case Tablet press
Butter dishes should be filled with dense greasing (LITOL-24)
13). the press periodically, that Is required to check mobile parts
To see, presence of greasing and their status of friction. If there will be defects,
The serviceman should correct in due time them before uses press.
14). After the termination of job, a part of a powder should be removed.
To clean a surface of a table with a matrix and all parts tabletpress a brush. If
press it will not be used during long time, to dismantle
The press-tool to clean press completely, and to grease all smooth
Surfaces anticorrosive fat.
15). the Press-tool after dismantle together with anticorrosive fat
Should be placed in an iron box with a covering. It is required to contain
Punches and matrixes separately to clean and prevent occurrence of corrosion or
Damages.
notes:
16). In job pay attention to quality of received tablets,
If you have noticed, that on a surface of ready tablets have appeared skoly,
Cracks, cracks, distortions stop to use worn out
The press-tool. Quality depends on quality of the press-tool in many respects
Tablets.
17). do not use too much damp powder since it can
To promote jamming of punches in a matrix.
18). At job press avoid hit of extraneous subjects in
Driving parts of the mechanism. All adjustments to make after a full stop
Press and disconnect from a network of power supplies.
19). Watch closely, that greasing did not get in a zone of pressing
Tablets and in the bunker with a powder. Since parts of greasing can get in ready
Tablets and to spoil quality.
20). At greasing details press and fillings of butter dishes with greasing
Watch to not overflow them. On the case of the big gear it is specified
An arrow a direction of rotation. Do not force a gear to rotate back,
To avoid mechanical damages .
21). Being near to working as presses watch closely, that
The handle of a flywheel has not struck you. After debugging jobs the handle can be unscrewed.
22). Job with Tabletpress 6000S to spend in a premise with
In temperature of +18 degrees, with humidity of air no more than 70 %. Remember, that
Excessive humidity gives occurrence of a condensate on metal parts press,
Getting in a powder there can be a jamming.
23). To jobs on editing, connection, adjustment and technical
To service of Tabletpress 6000S experts with corresponding are supposed
Skills and education.
24). Partial or full non-observance of service regulations,
Listed in the given Instruction, deprives with you the right on guarantee
Service besides the manufacturer and the seller do not bear the responsibility
For breakages Tablet press and the traumas received as a result of such
Infringements.
Packing sheet:
Tabletpress 6000S NEW
- 1
El.motor 1,1 Kw 1400 r/minute 220-380 V - 1
A belt А-1000
- 1
The bunker stainless steel
- 1
The handle debugging
- 1
To read the full version about technology
Pharmaceutical manufacture of medicines in section " TECHNOLOGIES "
We offer you
our link base:
OUR WEB SITES
and USEFUL LINKS.
View small videoclips about our equipment :
|
